Harlequin Hi-Shine™

It is not recommended as a permanent flooring. If you want to glue the Hi-Shine we would recommend using a F-Balls, F46 a pressure sensitive adhesive to do a full stick. You would use a 1.5mm notch trowel and then roller the adhesive, let the adhesive turn from clear to opaque like you would normally, then lay the vinyl. This will eliminate any foot prints showing in the adhesive. You do have to be very careful, If the floor is walked before adhesive is properly cured you could get foot prints show through it as well as any tiny lumps and bumps.

Harlequin Double-Sided Tape is recommended when taping the underside of the floor to a sub-floor. The high-tack/low-tack tape is a safe and secure option for working with temporary applications. Carefully remove tape by gently pulling up and working parallel to the floor. Top-taping of Hi-Shine is not recommended because removal of the tape could damage the surface of the floor.